Ultralok Two Piece Controlled Grip Lockbolts

Ultralok Two Piece Controlled Grip Lockbolts

High strength vibration resistant Lockbolt and collar system provides high controlled clamp. The Ultralok Lockbolt is placed through the work piece and the collar is placed over the Lockbolt end. The two pieces are swaged together using the appropriate setting tool and the Lockbolt is broken off flush with the collar. Available in diameters of 3/16”, 1/4”, 5/16” and 3/8” in zinc plated steel, stainless steel and aluminum. Three collar profiles are available as applicable by finish in full, half or flanged.

Recommended Placing Tools: Diameter sizes 3/16” and 1/4” may be placed with NG-4 hydro-pneumatic tool equipped with applicably sized nose equipment for diameter of fastener being placed. Diameter sizes 3/16”, 1/4”, 5/16” and 3/8” may be placed with # 722 series hydro-pneumatic tool equipped with lockbolt nose equipment specific to fastener size being placed. ** This tool can also be optionally fitted with a collar cropper to remove installed Ultralok Lockbolts. **

Category:

Parts List

Material & Finish: Zinc Plated Steel
Head Profile: Brazier

NOTE: Catalogue listing covers brazier head steel product. Truss head and 90º degree countersunk product is also available, most within grip ranges as illustrated for brazier head product. Digits 4 through 7 of the part number will designate the product line series as follows: 90º countersunk head – zinc plated steel 2622 series, truss head – zinc plated steel 2624 series, truss head aluminum alloy 2803 series, brazier head 304 stainless steel natural finish 2691 series, and brazier head aluminum alloy 2801 series.

Body
Dia.		Product #“A”
Grip
Range		“B”
Nominal
Head Dia.		“C”
Head
Height		Drill SizeTypical Ultimate Strengths
* When Standard Collar Used *
Shear (lbs)Tensile (lbs)
3/16”26210602.062” - .187”.395”.132”#7 or 13/64”19401650
3/16”26210603.125” - .250”.395”.132”#7 or 13/64”19401650
3/16”26210604.187” - .312”.395”.132”#7 or 13/64”19401650
3/16”26210605.250” - .375”.395”.132”#7 or 13/64”19401650
3/16”26210606.312” - .437”.395”.132”#7 or 13/64”19401650
3/16”26210607.375” - .500”.395”.132”#7 or 13/64”19401650
3/16”26210608.437” - .562”.395”.132”#7 or 13/64”19401650
3/16”26210609.500” - .625”.395”.132”#7 or 13/64”19401650
3/16”26210610.562” - .687”.395”.132”#7 or 13/64”19401650
3/16”26210611.625” - .750”.395”.132”#7 or 13/64”19401650
3/16”26210612.687” - .812”.395”.132”#7 or 13/64”19401650
3/16”26210613.750” - .875”.395”.132”#7 or 13/64”19401650
3/16”26210614.812” - .937”.395”.132”#7 or 13/64”19401650
3/16”26210615.875” - 1.00”.395”.132”#7 or 13/64”19401650
3/16”26210616.937” - 1.062”.395”.132”#7 or 13/64”19401650
3/16”262106171.00” - 1.125”.395”.132”#7 or 13/64”19401650
3/16”262106181.062” - 1.187”.395”.132”#7 or 13/64”19401650
3/16”262106191.125” - 1.25”.395”.132”#7 or 13/64”19401650
3/16”262106201.187” - 1.312”.395”.132”#7 or 13/64”19401650
1/4”26210802.062” - .187”.500”1.61”17/64”33103000
1/4”26210803.125” - .250”.500”1.61”17/64”33103000
1/4”26210804.187” - .312”.500”1.61”17/64”33103000
1/4”26210805.250” - .375”.500”1.61”17/64”33103000
1/4”26210806.312” - .437”.500”1.61”17/64”33103000
1/4”26210807375.” - .500”.500”1.61”17/64”33103000
1/4”26210808.437” - .562”.500”1.61”17/64”33103000
1/4”26210809.500” - .625”.500”1.61”17/64”33103000
1/4”26210810.562” - .687”.500”1.61”17/64”33103000
1/4”26210811.625” - .750”.500”1.61”17/64”33103000
1/4”26210812.687” - .812”.500”1.61”17/64”33103000
1/4”26210813.750” - .875”.500”1.61”17/64”33103000
1/4”26210814.812” - .937”.500”1.61”17/64”33103000
1/4”26210815.875” - 1.00”.500”1.61”17/64”33103000
1/4”26210816.937” - 1.062”.500”1.61”17/64”33103000
1/4”262108171.00” - 1.125”.500”1.61”17/64”33103000
1/4”262108181.062” - 1.187”.500”1.61”17/64”33103000
1/4”262108191.125” - 1.25”.500”1.61”17/64”33103000
1/4”262108201.187” - 1.312”.500”1.61”17/64”33103000
5/16”26211004.125” - .375”.650”2.14”P or 21/64”50304900
5/16”26211006.250” - .500”.650”2.14”P or 21/64”50304900
5/16”26211008.375” - .625”.650”2.14”P or 21/64”50304900
5/16”26211010.500” - .750”.650”2.14”P or 21/64”50304900
5/16”26211012.625” - .875”.650”2.14”P or 21/64”50304900
5/16”26211014.750” - 1.00”.650”2.14”P or 21/64”50304900
5/16”26211016.875” - 1.125”.650”2.14”P or 21/64”50304900
5/16”262110181.00” - 1.25”.650”2.14”P or 21/64”50304900
5/16”262110201.125” - 1.375”.650”2.14”P or 21/64”50304900
5/16”262110221.25” - 1.50”.650”2.14”P or 21/64”50304900
5/16”262110241.375” - 1.625”.650”2.14”P or 21/64”50304900
5/16”262110261.50” - 1.75”.650”2.14”P or 21/64”50304900
5/16”262110281.625” - 1.875”.650”2.14”P or 21/64”50304900
5/16”262110301.75” - 2.00”.650”2.14”P or 21/64”50304900
5/16”262110321.875” - 2.125”.650”2.14”P or 21/64”50304900
3/8”26211204.125” - .375”.750”.262”25/64”72106500
3/8”26211206.250” - .500”.750”.262”25/64”72106500
3/8”26211208.375” - .625”.750”.262”25/64”72106500
3/8”26211210.500” - .750”.750”.262”25/64”72106500
3/8”26211212.625” - .875”.750”.262”25/64”72106500
3/8”26211214.750” - 1.00”.750”.262”25/64”72106500
3/8”26211216.875” - 1.125”.750”.262”25/64”72106500
3/8”262112181.00” - 1.25”.750”.262”25/64”72106500
3/8”262112201.125” - 1.375”.750”.262”25/64”72106500
3/8”262112221.25” - 1.50”.750”.262”25/64”72106500
3/8”262112241.375” - 1.625”.750”.262”25/64”72106500
3/8”262112261.50” - 1.75”.750”.262”25/64”72106500
3/8”262112281.625” - 1.875”.750”.262”25/64”72106500
3/8”262112301.75” - 2.00”.750”.262”25/64”72106500
3/8”262112321.875” - 2.125”.750”.262”25/64”72106500

Related products