High Performance Type SCI Liner Screws

Feature 5/8” diameter square socket drive head for large contact surface and locking ramps under the head to prevent screw back out.

Plated finish.

Setting tool RPM not to exceed 2500 RPM or drill tip damage will occur.

Maximum material thickness for drill tip: .157” in aluminum and .118” in steel.

Use # 2 square socket driver bit of desired length.

Parts List

Screw SizeProduct #“B” Maximum
Fastened Material
# 10 x 3/4”892771.375“
# 10 x 1”905718.625”
# 10 x 1-1/4”905719.875”